Stainless Steel Split Cotter Pins
A2 Grade Stainless Steel Split Pins
The Split Pins are A2 Grade Stainless Steel and Meets DIN 94 Specification.
The Split Pins is often used to hold rods in place over a washer. (see image) They have two prongs, one slightly longer than the other, helping to split the pins apart, making application easier. The pins are sometimes known as Cotter Pins (mainly in the US). The quoted size is the size of the hole the pin is designed to fit through and the length of the shortest prong.
A2 Grade (Also known as 304) means that they are 30% stronger than ordinary carbon steel, corrosion resistant, and retains its strength at high temperature - All of which means it will last longer!
As the Split Pins are made from stainless steel, they will not rust from water exposure.
Perfect for a wide range of DIY tasks.
|Size||Measurement A||Measurement B||Measurement C||Measurement D||Measurement L||Pack Quantity|
|1.6mm x 22mm||2mm||3.2mm||2.8mm||1.4mm||22mm||50|
|1.6mm x 50mm||2mm||3.2mm||2.8mm||1.4mm||50mm||25|
|2.5mm x 25mm||2.5mm||4mm||4.6mm||2.2mm||25mm||25|
|3.2mm x 40mm||3mm||6.4mm||5.8mm||2.8mm||40mm||10|
|3.2mm x 75mm||3mm||6.4mm||5.8mm||2.8mm||75mm||6|